Congratulations on getting your new carburetor!!

To ensure things run smoothly, please follow the steps below:

1. Take black caps off vent tubes. These are not meant to stay on; they are only to keep things from getting inside during shipping.

2. You will need to set your own floats. These should be set during idle. We do the best we can to set them as close as possible using dial calipers.

a. Asphalt- you will want the front float ½ way up the site window in fuel bowl and ¾ up the site window in the rear float.

b. Dirt- you will want the front float ¾ way up the site window in fuel bowl and ¾ up the site window in the rear float.

c. Please allow the fuel to fill during idle.